home products dealers demo days tour pros about us worldwide top
 
 : K2K Super Utility :  : K2K iTILITY :
 : D-MAX460 Driver :  : POWER TORNADO INSPIRE IRON : : POWER TORNADO INSPIRE DRIVER :
 : SILICONE PUTTER :  
 : KASCO ROYAL DRIVER :  : KASCO ROYAL FW : : KASCO ROYAL IRONS : 
•Grip

PowerTornadoM63/M60 Fullcode
Deep center of gravity, for better accuracy and a higher flight(39.0 mm)
Low center of gravity, for high arc and low spin (31.0 mm)
• Low, deep center of gravity
• Ball takeoff speed enhanced by up to 1.5%
• Hit the sweet spot, no matter where ball makes impact on club face.

A homogeneous, rigid head increases take-off speed.
Kasco has its eye on the result: High rebound.

The latest carbon composite heads bend, losing impact energy and reducing ball take-off speed by 1.5% (See table below). By contrast, homogeneous heads made of a single material, reliably deliver higher take-off speed. They are also very forgiving: even with imperfect contact, the change in take-off speed is small, with little effect on distance and direction.
¡Shaft  
Corkscrew Hi60
 The twisting point near the grip prevents excessive head return at impact, for increased control.
Corkscrew Mid50
 Specs designed for ease of use by the golfer with a solid body turn. This shaft design also emphasizes control with a straight arc.
Corkscrews Lo40
 A lightweight model developed for the smooth swinger of the club, with fast head return at impact. Its twisting point near the head creates a high draw arc.

   
 
POWER TORNADO INSPIRE
Shaft Flex. Weight Torque Kick
point		 Twisting
point
CORKSCREW
Hi60		 X 68g 3.5 Middle High
S 66g 3.5
CORKSCREW
Mid50		 S 59g 4.3 Middle
R 51g 4.8
CORKSCREW
Lo40		 R 42g 5.6 Low
R2 39g 6.2
 
 
 
   
 
POWER TORNADO INSPIRE
No. 1
Club length (inch)
  (mm)
45.25
1149
Loft angle(degree) 9.5/10.5
Face angle(degree) 0
Lie angle(degree) 60
Balance D0(Mid50)/C8(Lo40)
Head material S-aging Titanium
Grip POWERTORNADO M63/M60Fullcode
Total weight
of club(g)		 Mid50 S
Lo40 R
Lo40 R2
303g
278g
276g
 
 
(Tip Diameter=9mm/Butt Diameter=15.6mm Hi60)
(Tip Diameter=9mm/Butt Diameter=15.3mm Mid50)
(Tip Diameter=9mm/Butt Diameter=16.0mm Lo40)
 
 
 
© 2004 Kasco Corporation, All Rights Reserved.
   - Terms of Use   - Contact Us